zonepax.blogg.se - Does tactrix openport 2.0 work with evo 8

Tactrix OpenPort 2.0 Adaptor for your laptop to talk to the vehicle.Windows Laptop with internet connection at your car.Launch Control RPM Increased to 5700RPMįor remote flashing, you will require the following items:.Choose to decrease clutch pressure if your shifts are too aggressive.Drive in SSport and Auto mode with shifts at normal RPM.Correct firmware for Ralliart or Evo X gearbox.Increased shift performance in all drive modes.Super Select SSport mode at any time and any speed, no need to hold for 3 seconds.This modified firmware can be loaded in store or remotely. This mod will make your car completely different to drive – customise your shifts with our AK SSport Mod. Able to log from Innovate Motorsports 2.This is the FIRST MOD you should do to your Evo X or Ralliart Lancer.

Able to apply GND or 5V-25V to OBD pins 1,3,9,11,12,13 or AUX 2.5mm stereo connector.

Standalone datalogs to microSD / microSDHC card without a laptop.

J2534 PassThru support with Windows DLL.

USB 2.0 full speed device (USB-A/Mini cable included).

All 3 reflash adapters are also included with the interface. For Mitsubishi, you’ll need the adapter for most pre CAN vehicles which include the 5-9 Evo. For Subaru you’ll only need a reflash adapter for the 2001 through 2005 WRX, but not STi. We include a USB cable with each OpenPort, which is all the hardware you’ll need unless you have one of the few vehicles that require a separate reflash adapter. Combined with Tactrix EcuFlash software, the OpenPort 2.0 is capable of reflashing a large number of newer Subaru and Mitsubishi vehicles, and support for other cars is in progress. The OpenPort 2.0 is the newest tuning hardware from Tactrix that is capable of communicating with a most OBDII compliant vehicles using a standard J2534 interface.